201 engine
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=34457
Printed Date: 21 Aug 2025 at 9:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 201 engine
Posted By: one54dodgetruck
Subject: 201 engine
Date Posted: 25 Jul 2011 at 12:21pm
|
Where can i find the brass screen thats tied to the oil pickup? I found some aluminum window screen but would like to use the brass!
Thanks
Andrew
-------------
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
Replies:
Posted By: junkman
Date Posted: 25 Jul 2011 at 12:51pm
|
do you know what it looks like? I have a pretty big piece that I saved but don't know if it is what you need. it is pretty fine. I don't even know what size piece you would need. If it isn't to big and isn't to fine I could probably mail you a piece in a standard envelope.
|
Posted By: one54dodgetruck
Date Posted: 25 Jul 2011 at 1:27pm
|
Its just like the screen on your house windows but is brass i might beable to save mine, it has a small tear because i sat the motor on the ground for a moment and it made a small hole. Im going to finish the engine today, so seeing if anyone has an idea where to buy it? Tryed the local hardware stores, but nothing found.
Andrew
-------------
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
Posted By: junkman
Date Posted: 25 Jul 2011 at 5:01pm
|
well mine is finer then house screen. It is probably the kind those dope smokers would want.
|
Posted By: one54dodgetruck
Date Posted: 25 Jul 2011 at 6:03pm
|
I grabed some aluminum window screen and plan on using a few layers.
Andrew
-------------
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
Posted By: junkman
Date Posted: 25 Jul 2011 at 6:16pm
|
I would look for a piece of stainless steel. would be cheaper than brass and a lot easier to find. And a little tougher then aluminum.
|
Posted By: Orange Blood
Date Posted: 25 Jul 2011 at 6:52pm
|
I would also try the stainless idea, remember part of the reason for brass was stiffness. When the oil is cold, the pump will colapse anthing like screen door stuff, or most anything made out of aluminum.
HTH
-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7
|
|