Construction and other equipment - HD6G engine conversion

Print Page | Close Window

HD6G engine conversion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33945
Printed Date: 26 Jun 2025 at 8:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD6G engine conversion

Posted By: superchief
Subject: HD6G engine conversion
Date Posted: 15 Jul 2011 at 8:58pm

Greetings to all whom have read my messages for help , many thanks for your input. We installed the engine and it runs great. Had to change the cam gear and transferred the front end parts to allow use of the oil clutch motor and the original injection pump. A lot of work but I t hink it was worth the effort . The turbo works fine, 60+psi oil pressure, 13psi fuel pressure .If our unit was a dozer we would not have had to make so many changes. I've tried to upload three pictures, I hope they are there when I post this message. Thanks again to all. Superchief. http://www.allischalmers.com/new/forum/uploads/4827/AC_7000_series_engine_conversion_&_installation_035.jpg - uploads/4827/AC_7000_series_engine_con uploads/4827/AC_7000_series_engine_conversion_&_installation_050.jpg - uploads/4827/AC_7000_series_engine_conversion_&_installation_043.jpg http://www.allischalmers.com/new/forum/uploads/4827/AC_7000_series_engine_conversion_&_installation_035.jpg - version_&_installation_035.jpg

Replies:

Posted By: Danny NM
Date Posted: 15 Jul 2011 at 9:57pm

Good looking loader. looks ready to work. thanks for the pictures. Danny