Farm Equipment - I need D15 II clutch help

Print Page | Close Window

I need D15 II clutch help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33343
Printed Date: 23 Oct 2025 at 10:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: I need D15 II clutch help

Posted By: captaindana
Subject: I need D15 II clutch help
Date Posted: 05 Jul 2011 at 9:16am

I need to know specs for the step on the D15 II flywheel. I am having it machined and need to know the difference from the outer bolt on area to the inner surface where the clutch works. Thanks y'all! Dana

Replies:

Posted By: Jeff Z. NY
Date Posted: 05 Jul 2011 at 9:27am

The machine shop I use {NAPA} has the specs in their flywheel books.
If you shop doesn't have the specs they will measure from a spot on the flywheel that is not worn and adjust the lip to the new depth of the flywheel surface.

Posted By: captaindana
Date Posted: 05 Jul 2011 at 12:26pm

Het Jeff thanks. My guy doesn't have the lip specs so I am trying to find them. OK gotta go bale bout 6 loads!