Farm Equipment - diagram or info on Marvel Schebler TSX-470 on CA

Print Page | Close Window

diagram or info on Marvel Schebler TSX-470 on CA

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33302
Printed Date: 18 Jul 2025 at 8:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: diagram or info on Marvel Schebler TSX-470 on CA

Posted By: Justin Widlund (IA)
Subject: diagram or info on Marvel Schebler TSX-470 on CA
Date Posted: 04 Jul 2011 at 5:25pm

I took the M/S TSX470 off my CA and I did not pay attention as to how the "float support spring" should go when I re-assemble. I thought it hooked on to the bottom of the float needle somehow. Could someone provide me with some service manual diagrams or a good explanation of how this goes back on? Thanks!

Replies:

Posted By: norm[ind]
Date Posted: 04 Jul 2011 at 5:55pm

you will know when you assemble it just turn it upside you cansee if right or wrong dad will know

Posted By: CTuckerNWIL
Date Posted: 04 Jul 2011 at 6:03pm

Here is a pdf file of the carb. There is no "float support spring"in the manual. I'm not sure what you are referring to.
http://www.oldcarmanualproject.com/manuals/Carbs/Marvel-Schebler/MS-Continental.pdf - http://www.oldcarmanualproject.com/manuals/Carbs/Marvel-Schebler/MS-Continental.pdf

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Justin Widlund (IA)
Date Posted: 04 Jul 2011 at 8:13pm

Thanks for you help. This piece is hard to explain as I don't think it appears in the manual that you referenced.

It has me puzzled. I know its purpose is to attach to the "hammer" end of the float needle so it won't stick, but I cannot make it fit anyway that it won't get stuck up in the seat or get crossways. I didn't pay close enough attention when I was taking this one apart.

Posted By: CTuckerNWIL
Date Posted: 04 Jul 2011 at 9:27pm

I found one. It's on page 8 of this manual.
http://www.oldcarmanualproject.com/manuals/Carbs/Marvel-Schebler/MS-Tr-Ford.pdf - http://www.oldcarmanualproject.com/manuals/Carbs/Marvel-Schebler/MS-Tr-Ford.pdf

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Justin Widlund (IA)
Date Posted: 05 Jul 2011 at 8:21am

Thanks again for you help Charlie.