Model B front steering arm assembly question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32955
Printed Date: 30 Sep 2025 at 10:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Model B front steering arm assembly question
Posted By: outlook6
Subject: Model B front steering arm assembly question
Date Posted: 27 Jun 2011 at 2:37pm
|
Are
both of these Model B front steering arm assemblies factory correct? As shown in the images, one has a cupped
washer welded on, the other does not. This serves to shield the upper end of the
spindle housing on a wishbone front end.
It helps to deter water and dirt from getting into the spindle
bushings. Just curious if this was a
factory fix or done after the fact by an individual owner. Regards, Jim in Austin
|
Replies:
Posted By: Dave Richards (WV)
Date Posted: 27 Jun 2011 at 3:22pm
| Both are factory correct. The one without the cupped washer is very rare according to my book, only on the first 101. |