Allis G Implement Question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32409
Printed Date: 14 Dec 2025 at 10:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G Implement Question
Posted By: Prairierth
Subject: Allis G Implement Question
Date Posted: 17 Jun 2011 at 7:10pm
|
I am very excited, just bought my "new" Allis G yesterday. It is in good shape and aside from tuning up the engine a little it is in good running order. I am not going to parade it or anything just use it for cultivation on my vegetable farm. It has the cultivator on it but was curious to find out if anyone had suggestions for where to find additional implements or knew of any for sale like a hiller attachment or a second cultivator? Thanks!
|
Replies:
Posted By: Bill Long
Date Posted: 17 Jun 2011 at 8:03pm
|
First, Congratulatiions!! You have an excellent and very collectable unit. You are very fortunate.
As to where to get G implements I wish I could help you. We sure sold enough but where ar they now? Probably passed on to the Junk Man. E-bay does not seem to have any either.
Ask on this site. You will be suprised what you find.
You would need a tool bar with disk attachments for a hiller. Second cultivator is out there but finding one that can be bought may be challenging.
Good Luck!
Bill Long
ps: Saw a few today at the Antique tractor show in Georgetown, DE.
|
Posted By: Toneman1
Date Posted: 18 Jun 2011 at 10:32am
|
Congrats on your "new" purchase, you will find that although small they are very hearty especially when it comes to helping in the garden. I had the good luck of finding a couple of them last year that had cultivators. I also picked up a plow and a sickle bar mower about the same time.
I have about 1.5 acre of garden and these little guys are a blessing just for that. So far this year I have not had to get behind a roto tiller at all by using the cultivato set up on the "G"
As far as implements, they are out there but a little difficult to find. I would say be patient and just keep looking. BTW the implements are kind of like the "G" usually a little pricey.
Welcome to the best website and advice site when it come to the "True Orange" stuff.
Tony ------------- Don't worry about the mule going blind, just load the wagon. |
Posted By: acgman
Date Posted: 19 Jun 2011 at 10:39am
|
Where in Ill. are you located? We are SW of Moline and may be able to help you out. Dave. |
Posted By: Ray
Date Posted: 19 Jun 2011 at 11:07am
| Hi: I have a PLOW AND A CYLCLE BAR MOWER FOR A G THAT I WOULD SELL. ALSO SEVERAL CULT. SHANKS,CLAMPS ECT. ALSO SOME LIFTING PARTS AND MOUNTING BRACKETS . 785-353-2392 |
Posted By: Eldon (WA)
Date Posted: 19 Jun 2011 at 11:15am
This a farm built cultivator that came on one of my G's. It is the only thing I use, I just haven't had good luck with the factory setup. I added a shield from a WD front cultivator and it works great.
 ------------- ALLIS EXPRESS! This year: |
Posted By: Herb(GA)
Date Posted: 20 Jun 2011 at 11:45am
| Eldon; that cultivator looks very functional. There is no way a weed is going to slip between shovels. And like most cultivators, not much room for driving error. |