Roto-baler/Old Style Equipment PTO Shield
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30620
Printed Date: 11 Sep 2025 at 5:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Roto-baler/Old Style Equipment PTO Shield
Posted By: Dave(inMA)
Subject: Roto-baler/Old Style Equipment PTO Shield
Date Posted: 12 May 2011 at 7:12am
|
Just posted a want ad on Classified for the front pto shaft shield for my roto-baler. I suspect that mine and a far number of them were mangled and lost years ago. Are there any decent used or even (hope!) NOS parts out there? Are there new parts still available? I know, I know - oughta start with something easy to find. :) But any hints would be most welcome. Thanks!
------------- WC, CA, D14, WD45 |
Replies:
Posted By: John (C-IL)
Date Posted: 12 May 2011 at 7:22am
| I have a baler that I will be parting out. It has the shield but I will have to confirm the condition for you. |
Posted By: Dave(inMA)
Date Posted: 12 May 2011 at 5:28pm
|
John, that would be much appreciated. ------------- WC, CA, D14, WD45 |
Posted By: CTuckerNWIL
Date Posted: 12 May 2011 at 8:07pm
|
Did the roto baler used the same shield as the PTO rake and the 35 picker? A one piece folding in the middle.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Dave(inMA)
Date Posted: 12 May 2011 at 8:34pm
|
Now that I do not know! But the shield I need is the front section that is hinged - covers the shaft between the tractor and the first u-joint. I'm also looking for the "funnel" shaped shield at the front of the long collapsible shield that runs from the u-joint to the right-angle gear box at the rear. ------------- WC, CA, D14, WD45 |
Posted By: Leonard
Date Posted: 12 May 2011 at 9:52pm
|
Dave if you don't find one I will look a the the disassembled item that I have at my dad's next week when I get there. If I have one I'll let you know. Leonard |
Posted By: Dave(inMA)
Date Posted: 13 May 2011 at 6:32am
|
Leonard, I'm still looking! Thanks for that offer. ------------- WC, CA, D14, WD45 |
Posted By: orangereborn
Date Posted: 13 May 2011 at 9:00pm
|
Don....This should be the style. Used on most all older AC Pto equipment.  |
Posted By: Don(MI)
Date Posted: 13 May 2011 at 9:09pm
Yup, it did. I have a 35 picker, and the pto rake. They all used the same guard.
 |
CTuckerNWIL wrote:Posted By: Dave(inMA)
Date Posted: 13 May 2011 at 9:27pm
|
orangereborn, that is one of the two parts I'm looking for! Picture's worth a thousand words - now that we have a picture, does anyone have one that they'd like to sell? I am also looking for the small section that mounts between the front and middle shields. It's sort of a squared-off bell shape that joins the front shield to the long middle shield. Thanks, guys! ------------- WC, CA, D14, WD45 |
Posted By: orangereborn
Date Posted: 13 May 2011 at 11:38pm
| Don...I think that may be a 2000 word pic. Is the other part in the top right corner of the pic on the end of the long shield? Dale |
Posted By: Dave(inMA)
Date Posted: 14 May 2011 at 5:54am
|
Dale, it MIGHT be. The long shield I have is the one that the right end of the front shield is resting on. The long shield you mention looks different to me - rectangular in cross section rather than rounded. But the part you mention looks as though it performs the same function as the second part I'm looking for. I'd be interested in a better picture... Dave ------------- WC, CA, D14, WD45 |
Posted By: Ray
Date Posted: 14 May 2011 at 8:13am
| $50.00 Nice original front shield that bends in middle. 785-353-2392 |
Posted By: Don(MI)
Date Posted: 14 May 2011 at 8:15am
|
Hope this helps guys.....
The spring loaded clip end, mounts to the PTO/step shield on a WD/styled WC. The other end has a spring loaded bolt, that bolts that to either your hay rake/corn picker/ or roto baler.
    |
Posted By: RichinWis
Date Posted: 14 May 2011 at 8:21am
| Dave, the shield you are looking for is the piece that is all mangeled up in the rake photo |
Posted By: Don(MI)
Date Posted: 14 May 2011 at 8:35am
That other part, is riveted right to the implement. It should not come off.
Unfortunetly, someone smashed it pretty good on my rake. It did bend back out half way normal.
|
Posted By: John (C-IL)
Date Posted: 14 May 2011 at 3:59pm
| Dave, I got a chance to go look at the baler this afternoon. Unfortunately the shield you are needing is MIA. Sorry |
Posted By: Dave(inMA)
Date Posted: 14 May 2011 at 6:08pm
|
John, thanks a lot for looking! I suspect that many of those shields were mangled by overly enthusiastic (and perhaps not too skillful) backing up. :) Ray - could you send a picture or two to me? I'll drop you a PM. Leonard - I'm still looking! orangereborn and Don(MI) - thanks for posting those pictures - they surely helped me figure out what I need.
------------- WC, CA, D14, WD45 |
Posted By: Leonard
Date Posted: 22 May 2011 at 3:28pm
|
Dave, just got back from dad's place. I was able to find the part. I don't have a digital camera but can take a photo with my phone and send it to your phone if you like. If you want pm me your cell number and I will get right on it. Thanks Leonard. |
Posted By: AC220fan
Date Posted: 06 Sep 2016 at 9:28pm
|
Greetings, Does anyone know where I can buy a Gear box or gears for the gearbox for a AC PTO driven hay rake like this. Thanks very much.
|
Posted By: JimIA
Date Posted: 06 Sep 2016 at 9:41pm
|
I have a gear box. Where in Iowa are you located? Im in the NE corner near Decorah. Jim ------------- An open eye is much more observant than an open mouth |
Posted By: MACK
Date Posted: 06 Sep 2016 at 10:11pm
|
I may have the bell shaped part. Will look tomorrow.
I do have the piece that folds up. MACK
|
Posted By: CTuckerNWIL
Date Posted: 07 Sep 2016 at 10:13am
Mack, this original post was from 2011. It got bumped when AC220 was asking about a gearbox for his rake. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Dave(inMA)
Date Posted: 07 Sep 2016 at 8:48pm
|
And I have that shield I was looking for back then!! Thanks again to the guys on here who helped me with that. Dave ------------- WC, CA, D14, WD45 |
Posted By: MACK
Date Posted: 07 Sep 2016 at 9:50pm
| Guess I didn't notice 2011, but I do have one if any one needs one. MACK |