Farm Equipment - belly mower pulleys

Print Page | Close Window

belly mower pulleys

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30263
Printed Date: 09 Sep 2025 at 10:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: belly mower pulleys

Posted By: cabindawg7279
Subject: belly mower pulleys
Date Posted: 05 May 2011 at 9:42am

My belly mower is down and the grass is growing like mad. I need to replace a dual
v belt pulley 7 inches in diameter to fit 2 7/8 inch v belts(C).It's a tensioner pulley with center bearing. Any suggestions as to where to look?...most places I've tried don't care anything that big. It's off an old Danco belly mower for my "B". Any suggestions?

Replies:

Posted By: Tracy Martin TN
Date Posted: 05 May 2011 at 2:43pm

Try Motion Industries. They have about anything needed. Also McMaster Carr. HTH Tracy Martin

Posted By: Chalmersbob
Date Posted: 05 May 2011 at 9:30pm

Danco mowers were used on International Harvester equipment. When I needed blades for mine I went to an IH dealer and he had them in stock. Mine had 5" idler pulleys on it. You my not need that large of an idler. Bob

Posted By: E7018
Date Posted: 05 May 2011 at 9:37pm

I would go for a walk in the combine salvage yard. Can you use 2 single groove idlers?