D17 pie weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29938
Printed Date: 17 Sep 2025 at 2:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 pie weights
Posted By: vyvyjim
Subject: D17 pie weights
Date Posted: 29 Apr 2011 at 6:01am
|
What are the chances of finding the pie weights for the rear of my series IV D17?
Should I settle for the earlier one piece weights?
Thanks
|
Replies:
Posted By: Brian G. NY
Date Posted: 29 Apr 2011 at 8:48am
|
When I bought my Series II D-17, it had the pie weights on it.
Each piece weighs about 75 lbs so the weights add about 300 lbs per wheel.
Nope.........ain't gonna sell 'em. LOL
If you look thru the Pics of D-17s in the post back a few pages, I don't think
you will see one with the pie weights. That's what makes me think they're a little
rare. On the other hand, you would have thought a lot of farmers would have
bought them considering the power of the D-17?
There seems to be no shortage of the 1 piece A-C weights out there.
|
Posted By: JoeO(CMO)
Date Posted: 29 Apr 2011 at 9:47am
|
* ------------- |
Posted By: Eldon (WA)
Date Posted: 29 Apr 2011 at 11:36am
|
The Series IV weights should be the same as the 170/175/180/185 weights if you have the correct wheels. Casting number AM4483-1 http://www.brianahart.net/weights.htm - http://www.brianahart.net/weights.htm
Good Luck finding them!
------------- ALLIS EXPRESS! This year: |
Posted By: Brian G. NY
Date Posted: 29 Apr 2011 at 3:33pm
|
Eldon, Shouldn't that casting number be 4493? That's what mine are and they look exactly like yours. |
Posted By: Brian G. NY
Date Posted: 29 Apr 2011 at 3:36pm
| If there are "a lot of people" with those sectional (pie) weights "sitting in farmer scrap piles" like Joe says, its time to dig them out 'cause I bet there's a few guys out there willing to pay a lot more than "scrap" price for 'em! |
Posted By: junkman
Date Posted: 29 Apr 2011 at 3:50pm
| I worked 2 1/2 years in a busy scrap yard running a magnet and grapple in the short iron department. I seen alot of suit case weights and oil field weights but never remember pie weights. Wish now I would have saved one or two unstyled WC,s. |
Posted By: Sitesstables
Date Posted: 29 Apr 2011 at 4:16pm
|
I just bought D17 series IV came with them... Heavy suckers ------------- 1965 D17 Series IV |
Posted By: Eldon (WA)
Date Posted: 29 Apr 2011 at 10:35pm
If you click on the pic on the link you can see my numbers. 4493 is for the early D17, these have a round knob cast in them for some reason. ------------- ALLIS EXPRESS! This year: |
Brian G. NY wrote:Posted By: JoeO(CMO)
Date Posted: 30 Apr 2011 at 5:15am
|
I believe the round knobs aid in stacking on the wheel ------------- |
Posted By: Brian G. NY
Date Posted: 30 Apr 2011 at 9:27am
|
OK Eldon,
I can see that yours are 4493-1; the 1 must be the design change code.
And when I did look closely at your weight I could see the knob you're speaking of.
|
Posted By: roadrunner(IN)
Date Posted: 01 May 2011 at 9:07am
| I was looking at my weights and I have three of the 4493 without the knob. I would be interested in trading for 4493-1 if someone has them. |
Posted By: rmlarkin
Date Posted: 09 Feb 2017 at 7:08am
|
Hi I need 1 pie weight for a D-17 seer II Please E mail me rmlarkin28@gmail.com
|
Posted By: Allis dave
Date Posted: 09 Feb 2017 at 7:44am
| rmlarkin, You should start a new topic and place a wanted ad in the classifieds. You'll get a better response |
Posted By: NICKMI
Date Posted: 09 Feb 2017 at 8:03am
| There is a set in Grand Rapids mi Craigslist for 250$ located in hudsonville mi if anybody's interested not mine https://grandrapids.craigslist.org/grd/5939947833.html |
Posted By: Dan73
Date Posted: 09 Feb 2017 at 11:54am
| Just recently there was someone on here who bought a d17 with a loads an pie weights that wanted to sell them. I don't remember who it was but yes a wanted add in the classified section would help plus try searching the posts for the set that was for sale. |
Posted By: Mike Kroupa
Date Posted: 09 Feb 2017 at 12:36pm
| I have a set of pie weights for a D-14 that I would trade for a set of D-17 IV pie weights. Mike |
Posted By: HudCo
Date Posted: 09 Feb 2017 at 8:24pm
| sure arnt any weights around here i d like 6 of them for my wd |
Posted By: grinder220
Date Posted: 09 Feb 2017 at 8:32pm
| Are you wanting an actual single pie weight(one section) or normal wheel weight? Keep in mind a pie weight is just a section like a pie slice not a complete one piece weight. A D17 would have 4 pieces per side,a D19/190 or bigger would have 6. |
Posted By: DIESEL
Date Posted: 09 Feb 2017 at 9:10pm
| I'm the fella that just bought the D17 and would love to sell the weights. They are the #am 4493 pie weights. The problem with selling them seems to be my location, Holt county Nebraska. |
Posted By: rmlarkin
Date Posted: 10 Feb 2017 at 5:15am
|
I need just one. Thanks Dick rmlarkin28@gmail.com
|