"G" Cultivator Parts Need
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29612
Printed Date: 08 May 2025 at 9:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: "G" Cultivator Parts Need
Posted By: DennisA (IL)
Subject: "G" Cultivator Parts Need
Date Posted: 23 Apr 2011 at 10:04am
|
I'm in need of 3 different parts for the rear furrowing bar. All the parts I need are colored in the picture. I need 2 of item #13 part #308217 shank clamp, 2 of item #12 part #307933 shank clamp plate & 4 item #14 part #316847.
Thanks for your help.
 ------------- Thanks & God Bless Dennis |
Replies:
Posted By: Warren(Oh)
Date Posted: 23 Apr 2011 at 10:49am
| I could use those pieces, too but I plan to make a clamp that should work as these do. |
Posted By: CTuckerNWIL
Date Posted: 23 Apr 2011 at 11:16am
|
The plate should be easy to make if you have the dimensions of the clamp. The u bolts should also be available from Fastenal or somebody if you know dimensions. If a guy had one old clamp, and access to a decent break, the clamp wouldn't be hard. I'm not too helpful this morning Dennis. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: singingpig
Date Posted: 23 Apr 2011 at 2:08pm
| Hard to find pieces...I just had a piece of 2inch square tubing welded on so I can buy off the shelf tools. |
Posted By: Matt (Jordan,MN)
Date Posted: 23 Apr 2011 at 6:14pm
| I should have them i will take a look and see what all is there Matt |
Posted By: Dusty MI
Date Posted: 25 Apr 2011 at 10:45am
|
Those formed/stamped pieces are made from 1/4" thick steel. I have an 8' sheet metal break but it is only rated for 18 gauge steel. One might better get some 1/4" thick angle iron and weld those brackets up. I have a couple of them, not for sale, I can measure them if someone wants to try to make one. Or I can try making a couple for you. Dusty
------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Ray
Date Posted: 25 Apr 2011 at 7:12pm
| I have several of the unit brackets you need.Also have several of the single U bolts and brackets that bolts thru the frame on a G Cult. Will sell them. 785-353-2392 |