Disc with round snap coupler eye
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29470
Printed Date: 31 Dec 2025 at 10:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Disc with round snap coupler eye
Posted By: Jim Hancock
Subject: Disc with round snap coupler eye
Date Posted: 20 Apr 2011 at 5:52pm
|
Bought my neighbor's disc that has a round eye in place of the elongated eye.
Doesn't appear to be an Allis disc, no paint left either.
Tried to fit it into the bell but didn't go as it was too round.
It's about an 8 footer.
Who made this type of disc? Case, maybe?? Thanks for the info. Jim
|
Replies:
Posted By: Jim Hancock
Date Posted: 20 Apr 2011 at 5:54pm
| Oh yeah, it appears to be a drag type disc as it doesn't have any lifting arms to go to the lift arms on my 45. |
Posted By: Skyhighballoon(MO)
Date Posted: 20 Apr 2011 at 6:33pm
|
Jim - I have an 8 foot John Deere drag disc with a round eye. It's meant to be used with a clevis for hook-up to the draw bar. Does the hitch have a couple of rods running above it and a lever you pull up with notches to change the pitch of the gangs? That's what my JD has. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Don(MO)
Date Posted: 20 Apr 2011 at 7:26pm
|
Mike, I don't like your danged old Johnnie Deere disc it looks for mud holes. lmao ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Harvey/pa
Date Posted: 20 Apr 2011 at 8:33pm
|
I had a 24 blade McCormack drag disc that had a round eye.
Don, from the pictures that Mike posted I thought it looked like that dang green disc pushed you into the mud hole, of course that was awhile ago & I could be wrong...Harvey
|
Posted By: Jim Hancock
Date Posted: 21 Apr 2011 at 1:43am
| You know what Harvey, now that you mention it, I did see what looked like faded reddish orange paint on it in one spot right after he got it home for a yard ornnament. It's not there now tho. |
Posted By: JoeO(CMO)
Date Posted: 21 Apr 2011 at 5:25am
|
We had a MM disk, it also had the round hole, used with a clevis. ------------- |
Posted By: Jim Hancock
Date Posted: 22 Apr 2011 at 11:19pm
|
Mike, There are not any rods to shift the gangs to change the pitch.
There is a notched,half inch flat metal "bar" between the hitch angle irons that fasten to the round eye.
By pulling forward or pushing backward to disengage the notch from "rivet" that holds the two angle iron hitch tongues, lift the bar and slide the gangs back or forward to straighten them out.
If you'll post pic, I can see how your setup is and maybe fashion one on mine. I'd really love to be able to take this somewhere to use besides just here at my place.
Had about 60 acres of hayfield "given" to me to take care of just to keep it mowed down and do with whatever I wanted to with the hay. Got the WD's, just need the square baler now and the rake and haybine. 7' sickle mower might be a little slow, albeit the WD45 is somewhat fuel efficient mowing with it.
|
Posted By: Skyhighballoon(MO)
Date Posted: 22 Apr 2011 at 11:54pm
|
Jim - here's a pic of the hitch on my JD disc. You can see the adjustment linkage on top the drawbar. You can also put a hydraulic cylinder up there too if you wanted. It's a beat up disc but it still works. And as Harvey points out, it works good for helping Don find the mudholes, lol! Mike http://i39.photobucket.com/albums/e176/Skyhighballoon/2005%20Mike%20Allis%20equipment%20photos/P3310189.jpg -   ------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Jim Hancock
Date Posted: 23 Apr 2011 at 12:05am
|
Thanks Mike.
Mine is not even close to looking like this - frame wise.
Your's makes my frame look anemic.
Guess I had better take a pic or two and learn to post.
Busy weekend with camera work at church and possible rain all weekend long with the overcast sky.
We'll see how bright it is on Saturday to get a good pic.
|
Posted By: Jim Hancock
Date Posted: 23 Apr 2011 at 12:25am
|
BTW, what size of disc blade does your disc take?
I ordered 4 16 inchers today from Agri Supply.com Thank You Dans 7080!
They were surprised that I heard about them from this forum as the lady that I talked to hadn't heard about this forum.
Told them to tune in here and let it be known here what they do!!
|
Posted By: se iowa picker
Date Posted: 23 Apr 2011 at 8:55pm
| Sounds like an international 9b. Not a bad disk, I saved one from the the fence row on the neighbors place before the Cat got to it when they were building a pond. |