Farm Equipment - Nother D15 II question

Print Page | Close Window

Nother D15 II question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29465
Printed Date: 03 Oct 2025 at 6:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Nother D15 II question

Posted By: captaindana
Subject: Nother D15 II question
Date Posted: 20 Apr 2011 at 5:10pm

Hey guys too much flying lately, I can't get anything done home. Will the oil pan come off the 160 engine without removing the front end? If so can one remove the front ends rear pivot cap bolts and hold it down some enough to remove oil sump pan? Thanks, Dana

Replies:

Posted By: Tracy Martin TN
Date Posted: 20 Apr 2011 at 5:36pm

Dana, If you are that far into it,Just take the front end off. Probably needs front pin and bushing pivot fixed anyway. Rear pivot may need attention also. It would be difficult to align pan and gasket with wishbone still there. Can be done but not easy. HTH Tracy Martin

Posted By: captaindana
Date Posted: 20 Apr 2011 at 7:28pm

I hear ya Tracy...3000 miles away and 1000 the next day; I'll never get anything done lol! Thanks, Dana