rc
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27720
Printed Date: 23 Aug 2025 at 5:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: rc
Posted By: Pipe
Subject: rc
Date Posted: 22 Mar 2011 at 9:23am
|
whats a allis rc going for? runs and needs nothing but paint ?
|
Replies:
Posted By: MNLonnie
Date Posted: 22 Mar 2011 at 3:32pm
The tires could make $1000 difference, does it have the correct wheels in front and the correct bolts on the rear wheels. Could be from $1000 to $2500? Pictures would be great.
-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Posted By: Dave Richards (WV)
Date Posted: 22 Mar 2011 at 4:15pm
|
Check the engine serial # Should start with RC, If it starts with CE the engine is not original.
|
Posted By: Chad(WI)
Date Posted: 22 Mar 2011 at 4:53pm
|
Actually, the original engine serial # should start with just a "R" prefix. A suffix with a "G" is a gas engine..."K" is distillate, and that will bump up the price, and the original engine serial # compared to the tractor serial number should be relitively close as the same engines were used in power units and such...rear wheel center should have one "mousehole" VS 2 as seen on the WC. I know this was covered before some time ago, but there are a lot of details that are specific to the RC. As Lonnie stated too, rubber condition is obvious, and pics would be a plus also. Let us know what happens...Chad
|
Posted By: Pipe
Date Posted: 22 Mar 2011 at 7:39pm
|
I do know it has the r on the motor flange ahead of the serial number. I did not check the number for a match to the rear end . And I am not sure what a mole hole is on wheels. Rubber is pretty good and metal is straight. I am thinking he wants more than it worth to me so I well probably pass on it . Might regret it later but money is tight right now and I do have other project.
|
Posted By: myallis
Date Posted: 22 Mar 2011 at 8:15pm
|
If your not interested PM me. I would most likely be interested. I have seen these on other sites for 5000 to 5500. I tried to buy one that was not running and the guy would not get rid of it for 2500 that I offered. Would love to have one that runs with out having to overhaul it. These are rare tractors. Thanks for any info!
|
Posted By: WC7610
Date Posted: 22 Mar 2011 at 9:26pm
The engine and rear end serials won't match but should be fairly close in numbers.
-------------
Thanks
Most Bad Government has grown out of Too Much Government- Thomas Jefferson
|
Posted By: Pipe
Date Posted: 23 Mar 2011 at 7:50am
|
Thanks guys I am going to talk to him this weekend agian and check the numbers and the Mouse holes on the wheels.
|
|