D14 serial number location
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27294
Printed Date: 05 Jun 2025 at 7:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 serial number location
Posted By: jtheise4
Subject: D14 serial number location
Date Posted: 14 Mar 2011 at 2:52pm
|
Can anyone please tell me where the serial number is located on a D14? Thanks.
|
Replies:
Posted By: JeffMOnt
Date Posted: 14 Mar 2011 at 2:58pm
The serial number is located on the right side of the tractor (clutch side) by the bell housing.
Here is a link with a picture and serial listings.
http://www.oktractor.com/d14data.html - http://www.oktractor.com/d14data.html
|
Posted By: jaybmiller
Date Posted: 14 Mar 2011 at 6:20pm
|
Hay Jeff
It's on the LEFT side on both my D-14s, I know, you guys in 'TO' get confused...hehehe
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: DSeries4
Date Posted: 14 Mar 2011 at 9:35pm
Yes, left side (when sitting on the tractor).
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: onetotaltoolman
Date Posted: 07 May 2023 at 5:44pm
|
Do the engines in the D14 tractors carry a seperate serial number? Working on the valves now. There is a different procedure (slightly) for different engine heads in the d14. The book refers to a model number, but i'm not sure if that is the serial number on the bell housing , or if there is a different number actually stamped on the engine. Anyone know?
|
Posted By: steve(ill)
Date Posted: 07 May 2023 at 6:03pm
the TRACTOR serial number is on the left side, bell housing flange... the ENGINE serial number should be in front of that, on the engine flange.... I believe all the D14 engines had the 149 cubic inch motor, so the serial number will be 149- xxxxxx.
-------------
Like them all, but love the "B"s.
|
|