Help with WD dashboard
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27211
Printed Date: 30 Oct 2025 at 10:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help with WD dashboard
Posted By: AFChap
Subject: Help with WD dashboard
Date Posted: 12 Mar 2011 at 8:13pm
This is the dashboard for my 1950 WD. Can anyone tell me what goes in the center position? It was removed when I bought the tractor. Many Thanks!
 |
Replies:
Posted By: AaronSEIA
Date Posted: 12 Mar 2011 at 8:16pm
|
I think the light switch goes there. If the left one is a kill switch, the center is lights.
AaronSEIA
|
Posted By: norm[ind]
Date Posted: 12 Mar 2011 at 8:26pm
| kill switch goes in that hole |
Posted By: Dakota Dave
Date Posted: 12 Mar 2011 at 8:40pm
| Your Light switch is in the correct place. That hole would have the magneto switch. If you had a distributor then you should have a key switch on the bottom left corner. |
Posted By: AFChap
Date Posted: 12 Mar 2011 at 9:53pm
| Thanks guys! Now I just need to find a kill switch and a wiring diagram. :-) |
Posted By: CTuckerNWIL
Date Posted: 12 Mar 2011 at 11:22pm
|
If your generator has been disconnected, read this page before you start the tractor up. http://dueyschutter.freeservers.com/photo5.html - http://dueyschutter.freeservers.com/photo5.html Wiring for the mag is a wire from the post on the mag to a grounded switch. When the mag is grounded, the tractor is dead. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: AllisChalmers37
Date Posted: 13 Mar 2011 at 1:34am
|
That looks similar to the one on my 1941 WC. I guess there wasn't much difference.
------------- 1937 WC, 1950 CA, 1959 D14, 1967 190XT, 2006 Ram 3500 |