shifter problems/7580
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=26328
Printed Date: 05 Aug 2025 at 4:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: shifter problems/7580
Posted By: darrel in ND
Subject: shifter problems/7580
Date Posted: 25 Feb 2011 at 9:17pm
|
Was using my 7580 to pull the haywagon today haling big round bales. Something in the "T" handle shifter let loose, and now the twisting action doesn't work any more. It still twists, but just doesn't accomplish anything; it's stuck in the 1st/reverse slot. Any one know if I should start by tearing apart the shifting console first, or take up the floor board? It was a long drive home in 1st gear! Thanks in advance, Darrel
|
Replies:
Posted By: Wes (VA)
Date Posted: 25 Feb 2011 at 11:02pm
|
theres a cable in the console that could have broken. Pull the side cover off of the console and you should see what happened. how far of a ride did you have back home??
|
Posted By: darrel in ND
Date Posted: 26 Feb 2011 at 8:57am
Posted By: Orange Blood
Date Posted: 26 Feb 2011 at 9:12am
Sound like the end of the cable broke, on some models they had a ball stud, that would break also, not sure which yours has, fairly simple fix, just got to get to it. It it was hard twisting or shifting, while you are there take the time to replace both cables. If the cable are old and stiff or full of dirt, you will be amazed at the difference!
-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7
|
|