Farm Equipment - snap coupler corn planter

Print Page | Close Window

snap coupler corn planter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=25000
Printed Date: 08 Jul 2025 at 6:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: snap coupler corn planter

Posted By: crystal allis
Subject: snap coupler corn planter
Date Posted: 31 Jan 2011 at 5:03pm

hi i have a allis chalmers snap coupler two row planter that plants good but the gear in the bottom of my fertillizer hopper has a broke tooth does anyone have a lead on where i could find one anyway thanks scott

Replies:

Posted By: Dans 7080
Date Posted: 31 Jan 2011 at 5:10pm

There was a post on here a few days ago about one for sale. I dont know if it would work or not. You might try looking back a few days and try to find it. Its in the classified section, warren OH put the post up.

Posted By: Skyhighballoon(MO)
Date Posted: 31 Jan 2011 at 5:49pm

Any chance you post a picture of the gear with the broken tooth? That would be a huge help for someone to know if they happen to have the part you need. Mike

-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers

Posted By: GlenninPA
Date Posted: 31 Jan 2011 at 6:56pm

Especially since there are two different types of fertilizer hoppers it could be....

I got parts for mine from AGCO, JimIA is a great guy to have on your side!

Posted By: crystal allis
Date Posted: 01 Feb 2011 at 1:42am

hi will get a picture posted tomorrow thanks for your replys

Posted By: Robert Mull Georgia
Date Posted: 01 Feb 2011 at 6:29am

Is this the type you have?

uploads/932/rsz_11img.JPG - uploads/932/rsz_11img.JPG

Posted By: crystal allis
Date Posted: 01 Feb 2011 at 7:30am

yes that is the type i have, from your drawing the part i need is the feed plate the cast plate with teeth in the hopper bottom.

Posted By: Gordy
Date Posted: 01 Feb 2011 at 8:49am

I have a couple of those plates $20 plus shipping

Posted By: Robert Mull Georgia
Date Posted: 01 Feb 2011 at 10:43am

I bought one from AGCO about 10 years ago. The 20.00 above is a steal.

Posted By: crystal allis
Date Posted: 01 Feb 2011 at 11:19am

thanks for your help