Farm Equipment - Depth Stop for Cultivators

Print Page | Close Window

Depth Stop for Cultivators

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24981
Printed Date: 27 Jul 2025 at 1:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Depth Stop for Cultivators

Posted By: Robert Mull Georgia
Subject: Depth Stop for Cultivators
Date Posted: 31 Jan 2011 at 12:02pm

I need the Depth Stop for the rear furrow bar on the cultivator for my D-15 series II. Anybody got one for sale? D-14, D-15 or D-17 will work.

uploads/932/Cult._Depth_Stop.pdf - uploads/932/Cult._Depth_Stop.pdf

Replies:

Posted By: Robert Mull Georgia
Date Posted: 01 Feb 2011 at 7:00am

Bump I have had 75 views but no posts for this item. I may have to fabricate one.

Posted By: Fred in Pa
Date Posted: 01 Feb 2011 at 7:34am

It.s a tuff one . I have for D-10 -12 snap couple

Posted By: Robert Mull Georgia
Date Posted: 01 Feb 2011 at 10:45am

Fred, Do you think one for a D-10-12 would work?

Posted By: Fred in Pa
Date Posted: 01 Feb 2011 at 11:51am

No D10-12 bolt on axle where lift cyc . is

Posted By: David Grubb
Date Posted: 01 Feb 2011 at 11:56am

Could a draw bar support be heated and bent down enough?

-------------
Dave

Posted By: Dave in il
Date Posted: 01 Feb 2011 at 1:40pm

We used to use a 4 row wide SC cultivator similar to that on our D17 but it didn't use a stop like that, guage wheels on the cultivator frame and each gang controlled depth.

Posted By: JoeO(CMO)
Date Posted: 01 Feb 2011 at 2:29pm

I remember the one on our D14, sure was noisy and would've prefered depth wheels

-------------

Posted By: Jim-Ohio
Date Posted: 01 Feb 2011 at 3:11pm

Fred, Would that one for a D-10/12 be the same as for a CA? I am looking for one for a CA.

-------------
'61D17, '51WD, '51CA, '41C, '49C, Woods 5'&6'Mower, 6'Blade, CA-Plow, CA-Cultivator, 3-Btm snap-coupler plow, 4-row planter, WD 4-row cultivator, 80R mower,#7 mower,B/C mower

Posted By: MikeSMN
Date Posted: 01 Feb 2011 at 5:57pm

Robert,

I have a depth stop for my 2 row 200 Series cultivator, not for sale, but I can take photos or measurements if you want.

Mike

Posted By: Fred in Pa
Date Posted: 01 Feb 2011 at 6:37pm

Not sure ,a guy just picked up his CA Monday ,so I have nothing to compair to .

Posted By: Robert Mull Georgia
Date Posted: 02 Feb 2011 at 6:40am

Mike SMN Photos and measurements would be nice. E-mail to : mullrbob@att.net

Posted By: Robert Mull Georgia
Date Posted: 04 Feb 2011 at 11:33am

Bump

Posted By: Dave (Mid-MI)
Date Posted: 04 Feb 2011 at 6:20pm

Bob, I have one that I believe came from a D-14. I will check tomorrow to see if it fits on my D-15 II. $10.00 plus shipping. dave

Posted By: Robert Mull Georgia
Date Posted: 04 Feb 2011 at 7:34pm

Dave (mid-Mi) Isent you a private message.

Posted By: Robert Mull Georgia
Date Posted: 10 Feb 2011 at 6:53am

Dave (mid-Mi) What is the total and your address? I will send you a money order. My e-mail is: mullrbob@att.net