Farm Equipment - WD-45 Question

Print Page | Close Window

WD-45 Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23240
Printed Date: 11 Jun 2024 at 8:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD-45 Question

Posted By: Zyta
Subject: WD-45 Question
Date Posted: 01 Jan 2011 at 9:15pm

There is a small over flow tube from the hydraulic reservoir that permits the hydraulic oil to drain or overflow into the clutch bell housings. Can this be blocked or plugged off? or does anyone do anything different with this? I really don't want oil to ever get in there and mess up my clutch.

Thanks Jim.

Replies:

Posted By: MACK
Date Posted: 01 Jan 2011 at 9:28pm

Don't over fill your reservoir. It is a breather for your hyd. reservoir. MACK

Posted By: DSeries4
Date Posted: 01 Jan 2011 at 11:32pm

further to what Mack said, make sure the hole is not plugged so that it does allow the resevoir to breathe.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: Zyta
Date Posted: 02 Jan 2011 at 10:25am

Thanks!