Construction and other equipment

Print Page | Close Window

M Crawler Clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22741
Printed Date: 14 May 2025 at 8:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: M Crawler Clutch

Posted By: rspjr
Subject: M Crawler Clutch
Date Posted: 23 Dec 2010 at 8:38am

I am needing the four springs in the pressure plate, or the complete assembly. Help!

Replies:

Posted By: rspjr
Date Posted: 23 Dec 2010 at 8:40am

Forgot to mention, it is the engine clutch.

Posted By: LoggerLee
Date Posted: 27 Dec 2010 at 1:55pm

Might also post something over in the Construction equipment area,a lot of people think that a crawler is only a piece of construction equipment,not a farm implement as originally they were.

Posted By: everett048
Date Posted: 27 Dec 2010 at 2:36pm

had to have those springs made for our M,s

Posted By: Fred in Pa
Date Posted: 27 Dec 2010 at 3:00pm

P/U pressure plate has the same in them .I am out of them now .But sold a few of them for crawler's

Posted By: everett048
Date Posted: 27 Dec 2010 at 3:05pm

hi Fred yes havent found a M clutch without at least 1 or 2 broken

Posted By: orangeman
Date Posted: 27 Dec 2010 at 3:15pm

Guys: not familar with the M clutch, but could a guy use valve springs in this application by modifying them.

I had heard a guy used Chevy valve springs on an H-3 crawler steering cluthc.

Just a thought...

Posted By: everett048
Date Posted: 27 Dec 2010 at 3:17pm

no springs are a u shape

Posted By: usac3
Date Posted: 03 Jan 2011 at 7:22pm

I have a 36-37 M crawler and i had found an identical clutch at NAPA, same dia. and spline