Construction and other equipment

Print Page | Close Window

HD5 dozer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21785
Printed Date: 13 May 2025 at 8:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD5 dozer

Posted By: BiG210
Subject: HD5 dozer
Date Posted: 04 Dec 2010 at 6:40pm

I'am looking for a blade to fit a 1953 model hd5 thank you

Replies:

Posted By: Coke-in-MN
Date Posted: 04 Dec 2010 at 6:58pm

Just blade or full dozer set up , several mfg made the units , Most used a system to run arms to the rear Axel outboard bearing flange to use as the push base.

Lift systems varied in where they had bearing point on the truck frame as the truck oscillate unlike the 5G which had a solid truck frame cross-member.

here is one I had not seen before in type of lift as it uses tractor mainframe as part of lift hardware.

http://www.allischalmers.com/new/forum/forum_posts.asp?TID=15002&title=hd5-bulldozer-frame - http://www.allischalmers.com/new/forum/forum_posts.asp?TID=15002&title=hd5-bulldozer-frame

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: BiG210
Date Posted: 04 Dec 2010 at 7:04pm

Just the blade is what i need it has a hyd fram that goes from the rear around the front to single pin hole in the front i think maybe garwood or backer but don't know thanks

Posted By: dadsdozerhd5b
Date Posted: 05 Dec 2010 at 4:27pm

i have a baker blade setup i was just thinking of scrapping. i will send you a pm with pics.

-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.