Shops, Barns, Varmints, and Trucks - B&S 22 hp VEE engine carb

Print Page | Close Window

B&S 22 hp VEE engine carb

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210365
Printed Date: 13 Mar 2026 at 2:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: B&S 22 hp VEE engine carb

Posted By: steve(ill)
Subject: B&S 22 hp VEE engine carb
Date Posted: 12 Mar 2026 at 10:17pm

have a 2005 Husqvarna 22 HP BRIGGS - 54 inch deck - 3speed HI/LO garden tractor that i have used a lot.. 21 year old and NEVER worked on the carb... Now it has a sputter / cough at anything below 1000 RPM... thought it might be the plugs, so i cleaned them - looked OK... thought it has 21 year old CARB, maybe needs a clean.. Took it apart ( double barrel) and all the gaskets and o-rings are BRITTLE !! .

Looked on line for a KIT and they are about $12.... Saw that you could buy a China CARB for $18. that fits 21- 22- 23- 24 - 25 HP engines... EVERRY VEE engine they ever built ?? HOw can that be ???.... Well, i bought a Chink carb for 2 chain saws, a weed eater and a leaf blower over the last 5 years and they are all GREAT... so i thought, WHY NOT, Only $18 bucks !!!

Installed yesterday and fired it up.. RUNS GREAT !!.... Idle was about 1000 RPM so i dropped that a little with the idle screw.. other than that NO MODS NEEDED ! Read on line that the plastic manifold can warp and suck air and cause "bad idle"... mine was pretty much flat, but i put a thin layer of Permatex on it anyway !

I have had GREAT LUCK with this little China Carbs..

-------------
Like them all, but love the "B"s.