HD6 Crawler - broken leaf spring under the engine
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209833
Printed Date: 21 Mar 2026 at 11:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6 Crawler - broken leaf spring under the engine
Posted By: Andymac
Subject: HD6 Crawler - broken leaf spring under the engine
Date Posted: 23 Jan 2026 at 5:24pm
|
Hi All, I've broken 2 leaf springs on my HD6, does anyone know if there is an aftermarket spring that can be purchased? I'm in New Zealand. Is it possible to slide out the 2 broken ones and replace them without taking the whole leaf pack off? Any tips or tricks on the best way to do this would be appreciated. Thanks in advance....
 |
Replies:
Posted By: Dennis J OPKs
Date Posted: 24 Jan 2026 at 4:57pm
| If you haven't already done it, you might also post in the Construction Equipment section |
Posted By: Andymac
Date Posted: 24 Jan 2026 at 5:10pm
| Thanks, I’ll do that |
Posted By: PaulB
Date Posted: 25 Jan 2026 at 7:47am
|
I have no idea of what is available in New Zealand, however around here there are many shops that make truck springs. If you have something like that, you could take the broken pieces to them and they could make new ones that match the size and curvature. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DrAllis
Date Posted: 25 Jan 2026 at 3:07pm
| I assume they are a stack of leaf springs. If so, there is a center bolt that draws the whole stack of individual springs tight together in the center. No way to repair in-chassis. |
Posted By: Ray54
Date Posted: 25 Jan 2026 at 7:55pm
|
Is this a dozer, loader, or just farm tractor. Loaders seemed to have more trouble than the others. They just put a solid bar across later model loaders. Neighbors bought a Cat D6 with broken spring, found an older model D6 to buy a spring from. It was a bit lighter, but being somewhat careful it never broke. So if you know of any old parts machines even if not a HD 6 check them out. Might be close enough.
|
Posted By: Andymac
Date Posted: 26 Jan 2026 at 4:52pm
| Thanks for your answers, I found a local company that will make me a new one. To clarify its an HD6 dozer that I have |