Pusher bolts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209733
Printed Date: 21 Mar 2026 at 11:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Pusher bolts
Posted By: NEVER green
Subject: Pusher bolts
Date Posted: 16 Jan 2026 at 8:10am
|
Are the pusher bolts from a 7060 the same as a 220 Mexican hat duals?? ------------- 2-8050 1-7080 6080 D-19 modelE & A 7040 R50 |
Replies:
Posted By: DrAllis
Date Posted: 16 Jan 2026 at 9:46am
| I think so. 210-220...7010-8550....all 8000's. |
Posted By: NEVER green
Date Posted: 17 Jan 2026 at 9:29am
Thanks Dr. ------------- 2-8050 1-7080 6080 D-19 modelE & A 7040 R50 |
DrAllis wrote:Posted By: injpumpEd
Date Posted: 18 Jan 2026 at 3:56pm
|
210/220 should be same from a 7010 and up, 7/8 X 12 odd size, but mcmaster-carr has the taps usually. Smaller 3 bolt triangle hubs are 3/4" coarse used on D21, 7000, 200, 190, D19. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |