Print Page | Close Window

Snap coupler requirements

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209574
Printed Date: 22 Mar 2026 at 4:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Snap coupler requirements
Posted By: Matt0926
Subject: Snap coupler requirements
Date Posted: 02 Jan 2026 at 6:36pm
I’m looking into putting a snap coupler on my b, however none of my allis tractors have had one so I don’t know what to purchase to be able to have the full system any pictures or help would be much appreciated, thank you.



Replies:
Posted By: steve(ill)
Date Posted: 02 Jan 2026 at 6:52pm
what does that gain you ? Regular 3 point or hitch would be more common.... do you have the implements for it ?

-------------
Like them all, but love the "B"s.


Posted By: Matt0926
Date Posted: 02 Jan 2026 at 7:53pm
.


Posted By: dr p
Date Posted: 02 Jan 2026 at 8:12pm
Think it would be easier( and probably safer) to trade up to a ca


Posted By: AaronSEIA
Date Posted: 03 Jan 2026 at 6:13am
They made one for the B, but it's very rare and would be very expensive.  OK Tractor sells a 3 point kit for a B.  Expensive, but modern.  Not sure what your goal is, but you can't hang much off the back of a B anyway, so if you want a lift, I'd suggest moving up to a CA or WD/WD45.
AaronSEIA


Posted By: Les Kerf
Date Posted: 03 Jan 2026 at 9:48am
A snap coupler B would be oh so very cool! Cool And properly weighted the narrow wheelbase would be about ideal for plowing small lots methinks.


Posted By: Matt0926
Date Posted: 03 Jan 2026 at 7:53pm
That was my thought


Posted By: Les Kerf
Date Posted: 04 Jan 2026 at 8:09am
Since snap coupler parts for the Model B are practically unobtainable, the standard one bottom plow setup is probably the best option. A two-way plow would be especially handy and those can still be found.


Posted By: AaronSEIA
Date Posted: 05 Jan 2026 at 5:40am
Originally posted by Les Kerf Les Kerf wrote:

A snap coupler B would be oh so very cool! Cool And properly weighted the narrow wheelbase would be about ideal for plowing small lots methinks.
Be easier and cheaper to just buy the 1 or 2 way mounted plow they made for the B.
AaronSEIA



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net