Cat 0/1 top link
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209537
Printed Date: 30 Dec 2025 at 10:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Cat 0/1 top link
Posted By: AC720Man
Subject: Cat 0/1 top link
Date Posted: 30 Dec 2025 at 4:48pm
Anyone know if they make these? I see cat 1/2 but no 0/1
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Replies:
Posted By: 55allis
Date Posted: 30 Dec 2025 at 6:55pm
Only ones I know is a plain cat 0.
https://www.sloanex.com/bmcoi557su-cat0toplink.html" rel="nofollow - https://www.sloanex.com/bmcoi557su-cat0toplink.html
-------------
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3
|
Posted By: AC720Man
Date Posted: 30 Dec 2025 at 7:08pm
That’s what I am finding as well. A friend of mine is looking for cat 0 on one end and cat 1 on the other.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: 55allis
Date Posted: 30 Dec 2025 at 7:59pm
He could get a cat 1 and put a bushing in it down to a 5/8”.
-------------
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3
|
Posted By: im4racin
Date Posted: 30 Dec 2025 at 9:47pm
|
So depending on what he is using it on he may be looking for cat 1 modified. The legacy xl is cat 1m. Legacy was cat 0. Very close but not the same. I believe the top link will interchange but know lower pins are different
|
|