D 14 brake job
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209386
Printed Date: 17 Dec 2025 at 3:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 14 brake job
Posted By: Tim NH
Subject: D 14 brake job
Date Posted: 16 Dec 2025 at 5:45pm
|
I've been working on changing brake shoes on my D 14 this winter. When I took the support plate off. The actuator lever and cam fell off before I could see how they were installed. The pictures are showing the right rear side. Ive found that the way I'm holding them, is the only way I can make them work. Once I got the the new shoes, springs, etc put on. I can make the brakes work fine with the actuating lever. My problem comes trying to put the axle housing on. It was almost impossible to get the brakes into the brake drum, and make the four bolts up. Then when I did, I found the brake lever won't move. Then got the other tire in the air, and can't turn the right side axle. Brakes are locking it all up. I've found someone has changed the brakes before. Maybe parts from the left side were put on the right side. Does anyone know what's going on.   ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Replies:
Posted By: jaybmiller
Date Posted: 16 Dec 2025 at 6:25pm
 ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: jaybmiller
Date Posted: 16 Dec 2025 at 6:27pm
|
hopefully this may help ? there are LH and RH parts.... I wonder if the part is facing the wrong way ?? Pretty sure 4-5 guys will KNOW for sure..... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: AC720Man
Date Posted: 16 Dec 2025 at 11:05pm
 Tim, this is a picture of mine before I disassembled it just after I sprayed brake clean to remove all the oil. I thought I took other photos as I disassembled it but I apparently did not. Look at the parts breakdown Jay posted, I believe the orientation is correct. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 16 Dec 2025 at 11:13pm
|
Flip the actuation lever over? Wish I was there with ya, it would jog my memory. I recall it went back together well, including the drop housing, the bolts lined right up. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Tim NH
Date Posted: 17 Dec 2025 at 9:46am
|
Robbie I'll give you a call this afternoon. ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |