Farm Equipment - D17 series 4 hydraulic line

Print Page | Close Window

D17 series 4 hydraulic line

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209134
Printed Date: 25 Jan 2026 at 9:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 series 4 hydraulic line

Posted By: Putnamd17
Subject: D17 series 4 hydraulic line
Date Posted: 28 Nov 2025 at 11:30am

Anyone have a picture of the correct hydraulic lines that run to and from the hydraulic filter can’t seem to get the top line quite right due to the end of it curving up by the brakes.0

Replies:

Posted By: Alvin M
Date Posted: 28 Nov 2025 at 1:05pm

AGCO Parts Shows It In the parts look up

Posted By: DrAllis
Date Posted: 28 Nov 2025 at 6:17pm

I would disconnect both brake pedal rods and springs and swing them down out of the way. I might even remove the RH platform. But, regardless, connect the hydraulic tube to the elbow at the brake pedal area first, but leave the nut a turn loose. Then, go to the filter end and connect the other end of the line.

Posted By: DrAllis
Date Posted: 28 Nov 2025 at 7:06pm

Also, a 3/4" open end "line wrench" is a must.