Farm Equipment - Allis rear mower question

Print Page | Close Window

Allis rear mower question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208910
Printed Date: 25 Jan 2026 at 9:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis rear mower question

Posted By: JK in Pa
Subject: Allis rear mower question
Date Posted: 13 Nov 2025 at 7:27pm

I just purchased an Allis Chalmers cycle bar mower. It has the two pins for lift arms and has a tail wheel. It is a twin wheel drive 82 style and requires a cylinder for the bar to lift. I want to know what model it would be. Thanks in advance.

Replies:

Posted By: Gary Burnett
Date Posted: 13 Nov 2025 at 9:08pm

If I remember correctly an 82R3.I have one been a few years since I used it

Posted By: Mikez
Date Posted: 15 Nov 2025 at 7:12am

You are describing a 82R mower. They used a hyd ram to raise bar. This mower also originally had brackets that went to pins and lift arms to stabilize.

The 80R3 was full 3pt with cable to lift bar.

82R,82S,82T models used hyd ram to lift bar