CA Muffler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208906
Printed Date: 25 Jan 2026 at 9:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA Muffler
Posted By: rustyorange45
Subject: CA Muffler
Date Posted: 13 Nov 2025 at 1:15pm
|
The last CA I purchased has a Stanley muffler on it. My other two CA's have the Walker 22028 mufflers on them. I was able to purchase them new at the time. After looking high and low on the Internet I have not been able to come up with anything. Walker 22028 or Nelson 04566T are what I am looking for, any suggestions for a good replacement. Non China. ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Replies:
Posted By: Alvin M
Date Posted: 13 Nov 2025 at 1:45pm
| Amazon Shows The 22028 Muffler |
Posted By: rustyorange45
Date Posted: 13 Nov 2025 at 1:47pm
|
It also says it's unavailable. ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: DSeries4
Date Posted: 13 Nov 2025 at 2:50pm
|
A&W Tractor in Cecil, WI has new Nelson mufflers available for most AC tractors. I have one on my CA - sounds great.   ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: rustyorange45
Date Posted: 13 Nov 2025 at 3:12pm
|
Looked at them as well, out of stock. ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: Jim.ME
Date Posted: 13 Nov 2025 at 5:10pm
| The last Walker 22028 I got turned out to be a reboxed Stanley AC-3. When I asked the parts guy to check on it the answer he got was, they weren't producing their version any more due to low demand. |
Posted By: rustyorange45
Date Posted: 13 Nov 2025 at 7:30pm
|
That's what I was afraid of. Maybe I will get lucky and find one someday. Has anyone any experience with the restoration quality advertised mufflers from Steiner's and other places? ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: dfwallis
Date Posted: 13 Nov 2025 at 8:44pm
I got the stainless steel one from Steiner. No problems so far. Stays nice and shiny. ------------- 1952 CA13092 |
rustyorange45 wrote:Posted By: IBWD MIke
Date Posted: 14 Nov 2025 at 6:43am
| Had good luck with the Steiner CA mufflers, not so good with the WD/45 ones. |
Posted By: rustyorange45
Date Posted: 14 Nov 2025 at 8:19am
|
Where are the Steiner mufflers made? Do they sound better than a Stanley? ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: JW in MO
Date Posted: 14 Nov 2025 at 7:09pm
|
I've been happy with the restoration one I got from DJS. ------------- Maximum use of available resources! |
Posted By: IBWD MIke
Date Posted: 16 Nov 2025 at 6:54am
I assume they are made in China. Both CA's here sound fine to me.
|