Allis chalmers C part out
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208747
Printed Date: 22 Dec 2025 at 7:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis chalmers C part out
Posted By: Ttague39B
Subject: Allis chalmers C part out
Date Posted: 02 Nov 2025 at 2:23pm
| I have most the parts from 2 allis chalmers C's im trying to sell. everything seems okay. I have louvers for the radiator too. |
Replies:
Posted By: SWPennTom
Date Posted: 05 Nov 2025 at 5:33pm
I'm in the market for a replacement PTO shaft for my '49 model C with the hydraulic pump option, so the PTO shaft has to be with the oil pump cam lobes. My existing PTO shaft is the 1 1/8 inch model. I have read in online forums such as this one, that the 1 3/8 inch PTO shaft can be swapped in as well.
If your C's have the factory hydraulic option, I may be interested. It's not that hard to get the shaft out, you just need a suitable puller to push it out. I want a PTO with reasonably healthy splines. The existing shaft splines are so far gone that the roll pin on the OCR keeps breaking. Too risky to run the bush hog. I'm looking at paying somewhere around $150 for a replacement. I'm waiting to hear back from some other used part suppliers. |
Ttague39B wrote:Posted By: Ttague39B
Date Posted: 05 Nov 2025 at 7:08pm
| I can probably get that to you for like $100. Not sure about the spines though, you can text me at 570 219 5488 |
Posted By: SWPennTom
Date Posted: 06 Nov 2025 at 11:12am
|
Here's a picture of what I'm dealing with currently. The splines are so far gone the overrun clutch wobbles way too much on the PTO shaft. It appears that the shaft has been cut shorter, probably making the wobble even worse. The hydraulic pump unit is there on the left. Any chance you can upload a simaler picture of the PTO on your tractor, and does it have the hydraulic unit option?  |
Posted By: Ttague39B
Date Posted: 06 Nov 2025 at 4:18pm
| I can get a picture to you, and it does have the factory hydraulic unit on it. |
Posted By: Ttague39B
Date Posted: 06 Nov 2025 at 4:28pm
Here's some pictures, its greasy, sorry about that, but all the spines look good on it, $125, plus shipping cost and its yours. 
|
Posted By: steve(ill)
Date Posted: 06 Nov 2025 at 4:36pm
not to be mean Tristan, but thats about the worst picture of a part for sale that i have seen... 30 seconds with a rag or putty knife would have helped 100%.. 
------------- Like them all, but love the "B"s. |
Posted By: Les Kerf
Date Posted: 06 Nov 2025 at 6:40pm
The part with which the potential buyer is most concerned is totally obscured.
 |
Posted By: Steve in NJ
Date Posted: 09 Nov 2025 at 6:47pm
|
A rag and some Brakekleen and you'll have a much better picture! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |