Model 500 loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208487
Printed Date: 29 Nov 2025 at 6:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Model 500 loader
Posted By: 6wheeler
Subject: Model 500 loader
Date Posted: 11 Oct 2025 at 10:13am
|
Hi all. Just a quick question. I would like some stands to remove my loader off of my 190xt. I don't think the loaders came with them. At least I haven't come across any. If in fact someone has a set? Would there be any specs a guy could get to build a set? Any info will be appreciated. Thanks ------------- 65' 190XTgas w/500 loader. several wheel horses. Schweiss 6025 mower. 76'Jeep J20. Lots of other junk too. |
Replies:
Posted By: Clay
Date Posted: 11 Oct 2025 at 7:23pm
|
The following is from the manual for the loader on my D-17. OPERATING INSTRUCTIONS 500 SERIES HYDROLIC FARM LOADERS For D-17, D17 IV & D-19 Tractors. Publication Form TM-380A (564152)
Page 10 Fig. 2 shows a stand for the support of the boom. Use a hoist to hold boom in position or use a stand which is available as an Attachment. |
Posted By: DSeries4
Date Posted: 12 Oct 2025 at 8:07am
|
The 500 loaders are not quick detach by any means. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Clay
Date Posted: 12 Oct 2025 at 11:42pm
That is an understatement.
|
DSeries4 wrote:Posted By: Oldwrench
Date Posted: 13 Oct 2025 at 7:33am
| Just for fun, I contacted Westendorf for a quote on a quick detach loader to replace the 500 loader on my D17IV, since it is no fun removing/replacing it, especially alone. It came in at $15,915.81. So, looks like I'll continue to play games with a hoist to remove it. |
Posted By: Leon B MO
Date Posted: 13 Oct 2025 at 12:00pm
|
We made a set of stands for our 500 loader out of inch and a quarter pipe, they're about 6 ft tall. Remove the pins from the back of the loader frame use the raise cylinders to put the stands in place then take the pins out of the top of the raise cylinder back the tractor out and stand the cylinders up in the loader frame. Doesn't take too long to remove the loader itself. I snapped a picture of it but I haven't figured out how to get a picture from my phone on here like I do on the computer. Leon B ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: DrAllis
Date Posted: 13 Oct 2025 at 1:30pm
| I've seen some broken angle irons at the 500's towers down low. But, I have never seen a tractor broken in half from a 500 loader. |
Posted By: Jerseyfarmer
Date Posted: 14 Oct 2025 at 4:24pm
| https://www.allischalmers.com/forum/making-500-loader-quick-tach-pics_topic195251_post1672952.html?KW=#1672952%20" rel="nofollow - https://www.allischalmers.com/forum/making-500-loader-quick-tach-pics_topic195251_post1672952.html?KW=#1672952 |
Posted By: 6wheeler
Date Posted: 14 Oct 2025 at 7:33pm
|
Thanks for the info all. I have all the pins loose. So, that won't be an issue. The stands for our JD 4020 w/46A loader won't work. I would guess the Allis loader wouldn't be any more difficult to remove than that one is because they are similar in design. I just thought if I could see what the Model 500 would have used? I could build something similar. I do like the link that Jerseyfarmer listed. Thanks ------------- 65' 190XTgas w/500 loader. several wheel horses. Schweiss 6025 mower. 76'Jeep J20. Lots of other junk too. |
Posted By: Clay
Date Posted: 14 Oct 2025 at 10:34pm
|
There is a manual for the 500 Loader on eBay. https://www.ebay.com/itm/127288058113" rel="nofollow - https://www.ebay.com/itm/127288058113
|