Gleaner N5 rasp bars replacement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208225
Printed Date: 18 Sep 2025 at 9:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Gleaner N5 rasp bars replacement
Posted By: AC 426 power
Subject: Gleaner N5 rasp bars replacement
Date Posted: 18 Sep 2025 at 4:46pm
| Hi all, when replacing rasp bars on a N5 is it necessary to replace the separator bars along with the thresher bars? Separator bars are yet in pretty good shape, but threshers are needing replaced. My long term goal with this N5 is to use it as a back up and replace it within a year or 2 so wasn’t wanting to put a bunch of money in it. But don’t want to cause a balance issue etc.The thresher bars are worn down enough that a pencil protrudes above it. Thanks! |
Replies:
Posted By: DrAllis
Date Posted: 18 Sep 2025 at 5:41pm
| Don't need to replace sep bars. Make sure to replace helicals that have lost their edge. |
Posted By: AC 426 power
Date Posted: 18 Sep 2025 at 9:00pm
|
DrAllis wrote: