Farm Equipment - 2000 plow trips?

Print Page | Close Window

2000 plow trips?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208188
Printed Date: 07 Dec 2025 at 8:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 2000 plow trips?

Posted By: jiminnd
Subject: 2000 plow trips?
Date Posted: 15 Sep 2025 at 7:55am

Anyone adjusted the trip pressure on trips, have a book, sounds simple enough but wondering about any experience with it.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)

Replies:

Posted By: 8070nc
Date Posted: 15 Sep 2025 at 1:03pm

Are you talking about hydraulic resets

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: jiminnd
Date Posted: 16 Sep 2025 at 9:21am

Sorry no, this is spring trip, says to remove washers under the springs. Just wondering how hard a project this is.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)

Posted By: Allis dave
Date Posted: 17 Sep 2025 at 9:30am

YOu should be able to trip them by hand. Maybe sure they are free and can slide back.
My older plow the plates were rusted together and would never trip. I had to take them apart and free them up.

Posted By: jiminnd
Date Posted: 17 Sep 2025 at 8:09pm

My problem, tripped them all by hand, had them trip while plowing. At a plow day in 3 hours I broke all 3 of the shears, were aftermarket but about all that is available.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)