Gleaner Cage 1 x 1-1/4
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208179
Printed Date: 15 Sep 2025 at 12:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Gleaner Cage 1 x 1-1/4
Posted By: Unit3
Subject: Gleaner Cage 1 x 1-1/4
Date Posted: 14 Sep 2025 at 5:06pm
What series did that start with? I wondered if it started with the beginning of the R series R5, R6, and R7.
-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
Replies:
Posted By: DrAllis
Date Posted: 14 Sep 2025 at 5:48pm
|
I don't think so. They were still considered a P-1 processor like the N-series. The early R-60/70 was also P-1. The last year or so R-60/70 was P-3 and everything after that. All R-40/50's were P-3. P-3's (to my remembering) were always 1" x 1.5" cage holes and the cage thickness was almost double of a P-1 and chromed on certain models.
|
Posted By: im4racin
Date Posted: 14 Sep 2025 at 9:01pm
|
I think the P3 started in late 90 with the hawk series
|
Posted By: Daehler
Date Posted: 14 Sep 2025 at 9:17pm
It started in 1990 with hawk series. Late half of 89 was still mainly p1 but had some p3 stuff getting integrated but also had other upgrades. 90 had threshing side p3 and sep side half p1 half p3. 91 was all p3.
-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
Posted By: Unit3
Date Posted: 14 Sep 2025 at 10:51pm
The reason I ask is there is a nice looking R7 on Tractor house. I get to dreaming because dreaming is free, but I thought about putting around a 15 or 18 foot bean head on it. Just something you could go from Farm to Farm and open them up..
-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
|