Flat Rate Charges(D14 Brakes)?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20736
Printed Date: 10 Jun 2024 at 6:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Flat Rate Charges(D14 Brakes)?
Posted By: 79fordblake
Subject: Flat Rate Charges(D14 Brakes)?
Date Posted: 13 Nov 2010 at 11:07am
| I have a friend of a friend that wants me to replace the brakes on his D14. I was wondering if anybody has a flat rate shop manual so I have an idea what to charge. Thanks. |
Replies:
Posted By: Gary in da UP
Date Posted: 13 Nov 2010 at 5:33pm
| My book thinks 5 hours, So on an older trtactor , I'd allow for 8, and warn your Bud it might be 10 hours. Edit to add thats for both sides, and no allowance for drum r+r. |
Posted By: jaybmiller
Date Posted: 13 Nov 2010 at 7:50pm
|
Maybe add an hour or two to replace the axle seals...while it's apart ???
------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: 79fordblake
Date Posted: 13 Nov 2010 at 11:25pm
| Yeah I will recommend to him to get oil seals for me to put in. He bought a manual for me to go by. I have done read over it before hand. 8 hrs total or 8 hrs for each side? Thanks. |
Posted By: jaybmiller
Date Posted: 14 Nov 2010 at 6:31am
|
I'd say a lazy day (8-9 hours total) for the whole job providing you've got all the tools,parts,cranes,blocks,etc.
If you want , you can come up here and 'practice' on my '57 D-14.Then do the '59 to better your time !!.LOL....
When you leave you'll be an expert at it.
Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Jack(Ky)
Date Posted: 14 Nov 2010 at 6:50am
| You need to check the diameter of the drums. When they get too big on the inside then the radius doesn't match the raduis of the brake shoes and then you only have a little spot contacting when you engage the brakes. A&I has the new drums and they aren't that expensive. If need be I can get you a price and drop ship to you if needed.JP |
Posted By: GBACBFan
Date Posted: 14 Nov 2010 at 7:57am
|
If he's a friend, the rate will vary depending on if he has cold beer in the fridge when you're done or not. ------------- "The trouble with quotes on the Internet is that you can never know if they are genuine." - Mark Twain |
Posted By: Gary in da UP
Date Posted: 14 Nov 2010 at 8:11am
| If you are servicing the drums add 2hr, 15 min, per side. |
Posted By: 79fordblake
Date Posted: 14 Nov 2010 at 9:26am
|
Thanks guys. He said he will treat me right on the price of the labor. I wasn't going to charge anything but he said he wasn't having that. I have the tools to do everything. This tractor has not had the brakes serviced in awhile. He said it hasn't had brakes for years. So I'm sure it probably needs to have oil seals replaced and I will have to check the drums while it is apart. So for now I guess I have to kinda give an estimate on the price. I guess I might as well figure in the extra costs b/c I do know that he wants his tractor done right. We will have to discuss it together. |
Posted By: 79fordblake
Date Posted: 14 Nov 2010 at 9:28am
Lol that is true but I don't drink. He is going to park the tractor in his shop with concrete floor, heat, and radio though, lol. |
GBACBFan wrote:Posted By: Jamie (KY)
Date Posted: 14 Nov 2010 at 9:38am
A buddy of mine helped me do mine. He said that there was enough room to actually double up on the axle seals. As cheap as they were, I wish we'd done that. It wasn't very long before the seals started bleeding through just enough to get on the new brake linings. It still stops, but you really have to put some pressure on the pedals. ------------- Just when I thought I was finishing my "honey-do-list", she turned the page!!! |