Farm Equipment - WD45 coil wires

Print Page | Close Window

WD45 coil wires

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207309
Printed Date: 05 Jul 2025 at 7:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 coil wires

Posted By: Driverdan
Subject: WD45 coil wires
Date Posted: 01 Jul 2025 at 3:45pm

...I have two WD45's...on one the wire from ignition is connected into + terminal on the coil. On the other, the wire from the ignition is connected to the - terminal on the coil... Can someone please tell me which is correct? (Both tractors are 6 volt positive ground,) Thanks...Dan

Replies:

Posted By: DrAllis
Date Posted: 01 Jul 2025 at 3:58pm

If both are truly POSITIVE ground, the wire from the distributer back to the coil should be the same or on the + post of the coil.

Posted By: Driverdan
Date Posted: 01 Jul 2025 at 5:02pm

Dr Allis...thank you do much! Thus is not the first time you have helped me out, and your knowledge is always appreciated!!