Construction and other equipment - H3 dozer track pads

Print Page | Close Window

H3 dozer track pads

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207291
Printed Date: 18 Aug 2025 at 12:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H3 dozer track pads

Posted By: Dave (Mid-MI)
Subject: H3 dozer track pads
Date Posted: 30 Jun 2025 at 4:27pm

The H3 dozer that I bought is missing two track pads. They are 12 inches wide. Anyone have a couple for sale?

Replies:

Posted By: Dave (Mid-MI)
Date Posted: 07 Jul 2025 at 9:19am

The pads that I need are actually 14 inches wide with 1.5 inch high grousers on them.

Posted By: orangeman
Date Posted: 07 Jul 2025 at 10:28am

Dave- Berco used to carry the track pads for the H-3, HD3 crawler loader -sadly they have disappeared and are NLA. You might check with a local track shop to see if they have a few around. ITP has material to build the track pads up should that be needed.

Link here for more info: https://industrialtractorparts.com/" rel="nofollow - https://industrialtractorparts.com/

HTH's ~ Orangeman

Posted By: Coke-in-MN
Date Posted: 05 Aug 2025 at 12:38am

H3 , H4 , 653 , 655 , all the same bolt pattern and rails .Could get pads for loader and weld grouser bar onto them . On my HD5G to build up pads I just welded 2 pieces of rebar onto each pad for buildup .

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.