Spin out rims
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207273
Printed Date: 19 Aug 2025 at 1:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Spin out rims
Posted By: Stoges
Subject: Spin out rims
Date Posted: 29 Jun 2025 at 7:30am
|
I have a WD with spin out rims, how do I keep them from spinning out during a pull, I tighten them with a heavy duty impact. I really don’t want to weld them. Thanks Bill
|
Replies:
Posted By: PaulB
Date Posted: 29 Jun 2025 at 10:05am
Do you see the small holes in one rail? There is supposed to be a stop block on either side of the PAW block.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: AintCheatnAintTryn
Date Posted: 08 Jul 2025 at 5:44pm
|
what paulB said, there are holes on the square slides on the rims, steiner tractor sells the stops for 17 bucks, i believe what you need is part number mis109, youll need the bolts (mis110) for em too which are 9 bucks. you can probably get a few off someone here or at flea markets for cheaper. if your loading your wheels with weights, watch tightening your locks with am impact, you dont wanna snap them off.
|
Posted By: DrAllis
Date Posted: 08 Jul 2025 at 6:20pm
|
The lock eccentrics on a WD only rotate about 180 to 200 degrees !! You can hammer all you want but they won't get any tighter !!! Get the MISSING rail stop blocks.
|
|