WC Rods
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206873
Printed Date: 31 May 2025 at 1:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC Rods
Posted By: khoney
Subject: WC Rods
Date Posted: 28 May 2025 at 3:20pm
| I am putting new rings on a WC and when putting back together I see there is no offset on rod too bearing. Does that mean they can be installed either way or is there a right and wrong ? |
Replies:
Posted By: steve(ill)
Date Posted: 28 May 2025 at 4:18pm
------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 28 May 2025 at 4:23pm
------------- Like them all, but love the "B"s. |
Posted By: DrAllis
Date Posted: 28 May 2025 at 6:07pm
| You've got to get the piston pins positioned correctly or you will have a groove cut into the sleeve from the end of the piston pin dragging !!!!!!! |
Posted By: khoney
Date Posted: 28 May 2025 at 10:07pm
| Thank you gentlemen, that is what I needed. |