Update: D14/D15 PTO shaft length ???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204843
Printed Date: 02 May 2025 at 8:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Update: D14/D15 PTO shaft length ???
Posted By: Macon Rounds
Subject: Update: D14/D15 PTO shaft length ???
Date Posted: 06 Jan 2025 at 12:41pm
|
Why did Allis Chalmers make the PTO shaft in D14/D15 different lengths ??? D14 is longer inside torque tube area.  ------------- The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate |
Replies:
Posted By: DrAllis
Date Posted: 06 Jan 2025 at 3:51pm
| I would have assumed they were the same length. I know a D-17 pre-series 4 is longer than a D-15. I know the torque housing is different between a D-14 and D-15 but I thought that was only at the side frame attachment area. I've got a D-14 and a D-15 S2 at the farm. I should measure the torque housing length between them. |
Posted By: Gary Burnett
Date Posted: 07 Jan 2025 at 7:52am
| Alot of differences in that area between a 14 and 15 |
Posted By: Macon Rounds
Date Posted: 10 Jan 2025 at 4:22pm
|
FYI: I measured several D14 and D15 torque housing lengths. All are the same length on exterior. Difference must be inside torque housing. ------------- The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate |