Square copper tubing
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203890
Printed Date: 12 Aug 2025 at 7:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Square copper tubing
Posted By: Tracy Martin TN
Subject: Square copper tubing
Date Posted: 29 Oct 2024 at 10:48am
|
I need a source for 10mm and 12 mm square copper tubing. I will need several feet of it. Not having any luck other than short pieces. I have to bend and solder these parts. Any help appreciated. Thanks, Tracy ------------- No greater gift than healthy grandkids! |
Replies:
Posted By: jaybmiller
Date Posted: 29 Oct 2024 at 11:21am
|
like this ?? https://ksmetals.com/products/cus014-3-16" rel="nofollow - https://ksmetals.com/products/cus014-3-16 maybe talk to them about 'feet' of it, though may be pricey due to special run !!?? or keep asking Google...... or make a 'jig' to magically transform round tubing into square or go back to drawing board and redesign whatever the thing is to use COMMONALLY available products ?? I know about the last option. idiot 'engineer' refused to rework his 'jib crane'. Can only get 2 parts per section of steel tubing, results in 6 FEET of scrap !!! Tweak the design and you get 3 pieces with 3" scrap. sigh.... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: steve(ill)
Date Posted: 29 Oct 2024 at 1:32pm
|
https://www.pjtube.com/products/square-copper-coils/%20" rel="nofollow - https://www.pjtube.com/products/square-copper-coils/
------------- Like them all, but love the "B"s. |
Posted By: DiyDave
Date Posted: 29 Oct 2024 at 3:29pm
Just out of idle curiosity, what are you making out of it? ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: jaybmiller
Date Posted: 29 Oct 2024 at 6:55pm
|
me too !!!! also just how are you going to bend it ? tar or ice ?? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Tracy Martin TN
Date Posted: 29 Oct 2024 at 8:11pm
|
Hey guys, I need metric to modify some existing inductor heaters. They are metric from start and I can cut and splice in new modified inductor to their current needs and save the bases they have. These were made in Germany. I can bend them on my Diacro bender once I make the rolls and die to suit. I saw the suppliers you guys came up with, but really need the metric to save me a lot of work. Any help is always appreciated. I thought Armand might know of a place, he mainly uses brass though. Thanks, Tracy ------------- No greater gift than healthy grandkids! |
Posted By: jaybmiller
Date Posted: 29 Oct 2024 at 8:36pm
|
hmm google found this... https://www.coppertubingsales.com/collections/copper-tubing-metric" rel="nofollow - https://www.coppertubingsales.com/collections/copper-tubing-metric maybe ??? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |