Print Page | Close Window

190 faster gears

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201835
Printed Date: 12 Dec 2024 at 11:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 190 faster gears
Posted By: zero61
Subject: 190 faster gears
Date Posted: 16 Jun 2024 at 7:22pm
Want to speed up a 190 rear end to about 25 to 1 or a little less. Any left over gears around to achieve this project?



Replies:
Posted By: DrAllis
Date Posted: 22 Jun 2024 at 6:04pm
I know of ONE puller from 40+ years ago that actually did this. He had a 5500 lb single turbo/intercooled 190XT tractor that needed more than road gear as he never had any issues running road gear. I was an A-C company rep at the time and suggested that he look into somehow mating a 190 XT (35 tooth) ring gear with a 200 (10 tooth) pinion shaft. That winter he did it and never invited me to help or even watch, but he got it done, and was very pleased with the approximate 10% speed-up when the next season came around. I have since determined he must have used a 200 rear end with the 10 tooth main shaft/pinion gear in it, and mounted a 190 ring gear (35 tooth) from a four-pinion differential to the 200 four-pinion differential and shimmed and spaced things to get the backlash where he wanted it. His original ratio was 27.81 to 1 and final ratio was 25.02 to 1, just what you've asked for.


Posted By: zero61
Date Posted: 24 Jun 2024 at 7:44pm
I will sure check into that. I’ll do some more investigating parts in the back back here and see what we can come up with. Thanks, Doc.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net