Question about sickle bar interchange
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201146
Printed Date: 18 Jun 2024 at 12:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Question about sickle bar interchange
Posted By: nate_o23
Subject: Question about sickle bar interchange
Date Posted: 02 May 2024 at 11:50am
|
Hello all I have a Allis C that I want to get a belly mounted sickle bar for. I found one that was previously mounted on a B. Am I correct in assuming that this will interchange with my C? Anything in particular I should be looking for as far as checking for wear or missing parts when I go look at this thing? Thanks for any help |
Replies:
Posted By: steve(ill)
Date Posted: 02 May 2024 at 12:18pm
|
The ALLIS sickle mower was a steel frame that mounted under the tractor with a bracket to the bell housing on each side, and bolted to the BIG C drawbar frame in the back... Front should be exactly the same... The rear circular drawbao on a B and C are different, but i think the distance to the front is the same... So it should bolt right on.. ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 02 May 2024 at 12:23pm
You have the Big "C" drawbar with two brackets attaching it up to the seat frame, right ? Here are the two bolts that hold the mower to the drawbar... You will need the pulley for the PTO shaft.... front end just hangs from the bell housing.. ------------- Like them all, but love the "B"s. |
Posted By: PaulB
Date Posted: 02 May 2024 at 1:19pm
|
The B/C sickle mower will bolt onto either a B or C tractor. The B/C mower is identified by the large wide single drive belt and straight upright mounts at the front. Also the #5 even though it is made for a CA tractor, it will mount onto a B or C tractor with some correct mounts. The #5 is identified by the thinner double belt drive and curved front mounts. ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |
Posted By: nate_o23
Date Posted: 02 May 2024 at 4:01pm
Here is pic of mower from ad. I cant tell if its a BC or no5 but maybe one of you can?
|
Posted By: nate_o23
Date Posted: 02 May 2024 at 4:04pm
| uploads/24728/431151441_442822861636161_6717851987419674573_n_2024-05-02_16-03-58.jpg" rel="nofollow - uploads/24728/431151441_442822861636161_6717851987419674573_n_2024-05-02_16-03-58.jpg |
Posted By: steve(ill)
Date Posted: 02 May 2024 at 4:37pm
|
looks like a #5... curved front hangers and 2 belts on the back.. ------------- Like them all, but love the "B"s. |
Posted By: ac fleet
Date Posted: 03 May 2024 at 10:57am
|
got one here on a C. never been off the tractor. ------------- http://machinebuildersnetwork.com/ |