WD45 belpt pulley questions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200937
Printed Date: 15 May 2024 at 3:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 belpt pulley questions
Posted By: AC WD45
Subject: WD45 belpt pulley questions
Date Posted: 17 Apr 2024 at 5:30pm
|
I am planning on putting the belt pulley back on my wd45 as it is original to the tractor. The trouble is I remember it seemed to leak at the shaft just behind the pulley itself. I know I can get a new external gasket for the pulley and I need to do so, but what does the inside consist of? Are there any internal seals to the pulley? ------------- German Shepherd dad 1957 Allis Chalmers WD45 #WD234847 1951 Allis Chalmers WD #WD88193 |
Replies:
Posted By: JoeM(GA)
Date Posted: 17 Apr 2024 at 6:38pm
|
see if this helps -  ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: AC WD45
Date Posted: 18 Apr 2024 at 5:05am
|
So it looks like there are two seals, one behind and in front of the outter bearing? Wonder where I might order those... ------------- German Shepherd dad 1957 Allis Chalmers WD45 #WD234847 1951 Allis Chalmers WD #WD88193 |
Posted By: snowman(MI)
Date Posted: 18 Apr 2024 at 6:31am
|
Seems like there is another seal that lives in the housing that the belt pulley assembly slides into. If I remember correctly it is a strip of cork about a 1/4" thick x 1/2" wide that come flat and you bend it to fit in a groove. This is my memory. Possibly someone can show a page out of the manual to confirm this. ------------- 1950 WD, 1966 D-10 III, 1961 D-10 II, 1966 D-15 II Gas, A-C Minibike, 917 Hydro Mower, 917 Hydro Blower w/cab, West Michigan "Allis Express" |
Posted By: Mikez
Date Posted: 18 Apr 2024 at 8:11am
|
#7 seal and #8 cork seal. I think we have them but also still available from agco
|
Posted By: Les Kerf
Date Posted: 18 Apr 2024 at 8:17am
uploads/21063/WD_Pulley_2024-04-18_08-14-52.png" rel="nofollow - uploads/21063/WD_Pulley_2024-04-18_08-14-52.png Tube Seal #11
|
snowman(MI) wrote:Posted By: AC WD45
Date Posted: 18 Apr 2024 at 8:17am
|
Mike could you get me a price? I'd love to get this back together as it is supposed to be, and I have a WD without a belt pulley that could really use the plug that's currently on my wd45. . ------------- German Shepherd dad 1957 Allis Chalmers WD45 #WD234847 1951 Allis Chalmers WD #WD88193 |