8070 flow divider pwr steering
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200915
Printed Date: 18 May 2024 at 5:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8070 flow divider pwr steering
Posted By: SteveM C/IL
Subject: 8070 flow divider pwr steering
Date Posted: 16 Apr 2024 at 6:28pm
| Think I need to pull sleeve out of flow divider because of sluggish steering. It wasn't this way til I ran low on hyd fluid when remote cyl hose sprung leak and I was unaware. How much oil is going to run out without draining it? I'm guessing only what's in the gear pump but don't know. Advice welcomed. |
Replies:
Posted By: Lynn Marshall
Date Posted: 16 Apr 2024 at 9:54pm
Y ou won't lose much oil by taking it out.
|
Posted By: SteveM C/IL
Date Posted: 16 Apr 2024 at 10:12pm
| Thanks Lynn. Almost called you this eve but decided not to bug you and posted here so in a way I got my answer from you after all. LOL! Picture don't hurt either. Figured I don't have much to lose by trying. |
Posted By: victoryallis
Date Posted: 17 Apr 2024 at 7:38am
|
Dropping the auxiliary fuel tank was the messy part for me. BTDT. I was told to clean the barrel up good. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: SteveM C/IL
Date Posted: 17 Apr 2024 at 7:41am
| I was hoping the fuel tank wouldn't interfere.... |
Posted By: Lynn Marshall
Date Posted: 17 Apr 2024 at 8:04am
| Fuel tank shouldn't bother if taken out from below. |
Posted By: victoryallis
Date Posted: 17 Apr 2024 at 11:04am
|
It’s close ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: SteveM C/IL
Date Posted: 17 Apr 2024 at 2:21pm
| Looks like plenty of room. Haven't started on it yet.... |