Hay day
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196420
Printed Date: 12 Nov 2025 at 4:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hay day
Posted By: AC720Man
Subject: Hay day
Date Posted: 31 Jul 2023 at 11:09am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: AC720Man
Date Posted: 31 Jul 2023 at 11:16am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 31 Jul 2023 at 11:17am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 31 Jul 2023 at 11:19am
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 31 Jul 2023 at 11:21am
 Charlie on the wagon for the first load. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 31 Jul 2023 at 11:23am
|
We made some beautiful orchard grass hay last week in 90 plus degree temps. Nice hay even though we haven’t had hardly any rain over the past 1 1/2 months. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 31 Jul 2023 at 11:30am
|
Ole 390 mower/conditioner still doing a good job cutting our hay. Still old school and just can’t justify a nice discbine. It’s slow and aggravating at times but it sure has mowed a lot of hay for the past 49 years. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: plummerscarin
Date Posted: 31 Jul 2023 at 11:59am
| Nice! I know what you mean. Still mow with a Heston 320 self propelled. Not enough there to justify a newer machine yet. |
Posted By: Lynn Marshall
Date Posted: 31 Jul 2023 at 12:06pm
| I'm a little confused here. If the XT is a Landhandler, shouldn't it be a Series three?? Either way, it's a fine looking tractor. |
Posted By: Mikez
Date Posted: 31 Jul 2023 at 9:13pm
|
Nice looking hay and tractors. We’re in the opposite situation. To many days of rain.
|
Posted By: Macon Rounds
Date Posted: 31 Jul 2023 at 9:40pm
|
Nice looking hay !!!! i can smell the fresh cut. OAN: I had to take a second look at the photo of the 190 in front of the barn. The white trim on the barn doors made it look like the tractor had a 4 post canopy. Hmmmm, I never seen one of those before. Very nice photos. ------------- The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate |
Posted By: Charlie175
Date Posted: 02 Aug 2023 at 1:03pm
Both of our 190's came from the same dealer and even though they were Series II's, they had the Land Handler decal on them. We figured the dealer at that time added them for sales appeal. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Lynn Marshall wrote:Posted By: Gary(VA)
Date Posted: 02 Aug 2023 at 2:29pm
| I had to go to Luray today. You guys are the driest place I've seen and I travel from Bristol to martinsburg for work. Hope you get some rain soon. |
Posted By: AC720Man
Date Posted: 03 Aug 2023 at 8:20pm
|
Gary we are burn up here as you witnessed. Everyone around us has received some rain but we seam to miss it. Lynn, as Charlie said our tractors were sold from the same dealership and stayed n the same county until we bought them. Back in 2017 when I restored mine there was discussion concerning Landhandler decals on late series II 190XT’s here on the forum. As the series III was being released, some dealers would place the Landhandler decal on tractors that may still be on their lot that had not sold yet. There was also discussion late series II got the decal at the factory just before the series III was released. All I know for sure is when I sandblasted my side panels and hood, the Landhandler decal ghost image was still there after I blasted the decal off. A final pass finally removed the entire image. If you have ever sandblasted this will make sense to you. To me it proved it was an original decal as I removed the original paint. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Ed (Ont)
Date Posted: 03 Aug 2023 at 8:41pm
Nice pics! What model NH baler? 
|
Posted By: AC720Man
Date Posted: 03 Aug 2023 at 8:57pm
|
Good ole reliable 273 Hayliner. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |