Crank differences?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196373
Printed Date: 05 Jun 2024 at 11:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Crank differences?
Posted By: JCSinPITTS,PA
Subject: Crank differences?
Date Posted: 28 Jul 2023 at 6:32am
i just assumed all cranks were the same. i purchased a NOS at the Gathering of the Orange in Maryland and never really looked at tit until yesterday. I started repainting the cranks and have two the same and one different! 
|
Replies:
Posted By: KMAG
Date Posted: 28 Jul 2023 at 7:15am
| I suspect the bigger WC engines used the hand crank allowing more leverage. Your smaller crank handle is the same as came with my ib. |
Posted By: Fred in Pa
Date Posted: 28 Jul 2023 at 8:33am
|
The IB dose not use a hand crank like WC WD RC ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Alberta Phil
Date Posted: 28 Jul 2023 at 9:10am
|
I've got one of those smaller ones also. It is from another make of tractor and had traces of red paint on it. I had to file the slot a little to make it fit properly on the Allis pin. |
Posted By: KMAG
Date Posted: 28 Jul 2023 at 11:52am
|
I pulled out my ib crank handle - not the same as your pic. I forgot it would be a bit long using on a B/C/CA as they don't have wrap around frames. 
|