Ac 78 hay rake
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196175
Printed Date: 21 Jun 2025 at 2:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ac 78 hay rake
Posted By: Ks oldtimer
Subject: Ac 78 hay rake
Date Posted: 15 Jul 2023 at 11:25pm
|
I am trying to locate the correct teeth for this old model 78 hay rake. It now has on at least two different teeth. It has four bars and 20 separate teeth on each bar. The axle is bent and has u-joints on each end, this is what I believe make it a model 78. |
Replies:
Posted By: BobPaulusCentrOH
Date Posted: 16 Jul 2023 at 5:56am
|
I still have a similar rake with straight axle. I was able to get generic teeth mounted in rubber at TSC back in the day. I have seen both rubber mount and spring teeth on this type of rake. Good Luck Bob
|
Posted By: SteveMaskey(MO)
Date Posted: 16 Jul 2023 at 7:44am
|
|
You can use generic rubber teeth or New
Holland steel teeth. Posted By: groundhog55
Date Posted: 17 Jul 2023 at 7:20am
| I will look, but I think that I have some teeth for that rake. |
Posted By: Ks oldtimer
Date Posted: 17 Jul 2023 at 1:36pm
| I have found several different styles of teeth at farm stores around here. I have seen the rubber mounts as well. The difference between most of the spring teeth is in the amount of twist where they fasten to the bar, not sure if that is a problem or not. |
Posted By: wade89
Date Posted: 17 Jul 2023 at 7:57pm
| I have a 77 and a 78. The 77 is running over half new holland teeth now and the 78 has rubber mounted just because the previous owner had already swapped over. Both work well. |