Construction and other equipment

Print Page | Close Window

HD4

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196174
Printed Date: 20 May 2024 at 4:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD4

Posted By: Mike K
Subject: HD4
Date Posted: 15 Jul 2023 at 10:54pm

Cylinder swivel ends. Where the pin goes through. All cylinders are have loose ends.

Replies:

Posted By: Codger
Date Posted: 16 Jul 2023 at 4:44am

Loose ends are common. Need photos of the affected areas before recommendation for correction.

-------------
A career built on repairing and improving engineering design deficiencies, shortcomings, and failures over 50 years now.

Posted By: Coke-in-MN
Date Posted: 16 Jul 2023 at 2:04pm

If you mean pins and bushings on cylinders , they bushing is replaceable and needs to be done before they wear through to the actual cylinder end and wears that area .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Mike K
Date Posted: 16 Jul 2023 at 10:24pm

Where would I get the bushings